PROSPECTING
Posted on March 1, 2014 by Wyatt Yeager
8.1 GRASS ROOTS by Vitor Pacheco
Grass roots exploration is the general term for the very initial stage of prospecting that starts from a zero base, that is, neither geological maps, nor aerial photos are available, and often not even topographic maps. Of these, my first experience was in Mozambique in 1972, when communication with the outside world was a very precarious land line and some times, when we were lucky, a fax, both by means of the post office at the nearest village, which was about 150 km away.
I do not think it appropriate here, to go into the prospecting work itself which consists of mapping, sampling, drilling, data synthesizing and interpretation. However, under advanced prospecting I will show some photos referring to sampling which, I think, takes most of the geological time.
8.1.1 Transport
In areas of grass roots exploration, most of the times even the main roads are simple tracks across the veld. Hence a tough reliable 4 wheel drive vehicle is fundamental as this example, still in Mozambique and which was my baptism of bundu bashing, indicates.Figure 143 shows the end of my successful attempt of taking my lovely car out of a river side mud bog. I was alone, and it took me 4 hours to get it out.
Figure 143 – Bogged down in deep Africa (Porto Amélia District, Mozambique).
Just for comparison purposes I also show the same kind of experience, but in Portugal in 1996 (fig. 144). This time it was easy, we only had to call the farmer to bring his tractor and pull us out. So, not only was this in a different continent, but also 24 years later.
Figure 144 – Bogged down in paradise (Alentejo, Portugal).
What I want to make clear is that if I had the fancy comfortable white car in Africa, even today, it would take me perhaps weeks to get it out, if at all. This because today’s sophisticated jeeps have so many complicated electronic gismos that one needs to have a highly qualified, not just mechanic, but a well equipped garage within easy reach.
Unfortunately I’m considered too old by the powers that be, to continue prospecting. One thing is for sure though, if I did go, the jeep I would choose is the Indian manufactured Mahindra (fig. 145). It is incredibly robust and has a totally old fashioned simple, reliable engine that will go anywhere and the only assistance it needs is regular greasing and any simple mechanic assistant to deal with minor difficulties.
Just as an interesting memory of the stay in India, notice the jeep’s front decorations with the string of flowers and the painted swastikas. This is a must to make sure the car is accepted by the gods.
Figure 145 – One of our local 4-wheel drive vehicles (Orissa, India).
8.1.2 Accommodations
Even in many remote parts of Africa it is often possible to organise a side farm building or similar locations to use as living and working quarters. When that is not possible, as in my stay in Angola, one has to organize camping facilities which must have a minimum of practicality and comfort. My full staff (fig. 146) consisted of one local geologist, one local person of the correct tribe and political affiliations, one overall organizer, two security guards (hence the guns), one cook with an assistant and two laborers. I was fortunate to find a very reliable and professional person, Vete Willy, who not only built our camp but also kept it going, always in impeccable conditions. He is not in the picture because, other than me, he was the only one capable of using the camera.
Figure 146 – My Angolan prospecting staff and me in the vicinity of our camp at Bentiaba.
I was working for a medium sized mining company but, not so far away, there was the camp of a very large mining group, who also had to organize a camp and whose chief geologist I became acquainted with. Since I have pictures of both camps it is interesting to put them side by side. The dimension difference is impressive. Two of my whole camps (fig. 147)
Figure 147 – The entrance to my prospecting camp (Bentiaba, Angola).
would fit within the entrance area of the other camp (fig. 148). Or putting it another way, when there are funds, much more can be done in a much shorter period, and in much more efficient working conditions.
Figure 148 – Large mining group entrance to their camping site and chief geologist’s caravan (Caama region, Angola)
The fleet difference is also striking. Figure 149 shows my two cars,
Figure 149 – My camp, and whole vehicle fleet, my tent and the office (Bentiaba, Angola).
and figure 150 shows part of the, let us call opposition, fleet. Also shown in my camp is my tent in the foreground and the office tent in the middle ground. Naturally this little office was strictly for rough work. We did have a comfortable house and office at the nearest town.
Figure 150 – Partial vehicle fleet of the opposition (Caama region, Angola).
Going now to the eating facilities, the comparison continues to be striking. Not only is there a great difference in space, but also the accommodation and the furniture. My little dining hut (fig. 151) was built with the minimum of the essentials.
Figure 151 – The dining room of my camp (Bentiaba, Angola).
The other one even had a TV, with its dish aerial at the left edge of figure 152 . One must be fair though, I did have a satellite phone and it worked pretty well. It was not as bad as in Mozambique but, after all, I was in Angola in 1997/8, that is, 26 years later.
Figure 152 – The dining facilities of the opposition (Caama region, Angola).
Finally, the ablution facilities. Our toilet (fig. 153) was the long drop method and to reduce unpleasant smells it was sufficiently far away, outside the camp area and on the correct side of the prevaling winds.
Figure 153 – My camp’s toilet facilities (Bentiaba, Angola).
Notice that the opposition even had a water pump so that one could have a nice cleansing shower at the end of the day (fig. 154). In my case, to wash we had to go to the nearby river and use the remaining water pools during the dry season. I will never forget though, the most enjoyable showers I had. During the rainy season it practically rained every day, and often late in the afternoon, that is, at the correct time to clean all the work day dirt and sweat. I would undress in my tent, come out with the soap and use the rain as a shower. It was divinely refreshing and it lasted long enough for me to complete the job. It is definitely a lovely memory.
Figure 154 – The oppositions ablutions area (Caama region, Angola).
8.2 ADVANCED PROSPECTING
After basic geological mapping, trenching is often used, especially over areas with poor or no outcrop. Additional geological mapping is done along them and, when applicable, tentative initial trench sampling will also be considered (fig. 155).
Figure 155 – Trenching along very weathered strata (Trás-os-Montes, Portugal)
Nowadays, after detailed mapping as well as soil, trench and rock outcrop sampling, if the indications are positive a drilling programme will be planned. In the old days short underground adits into the hill sides would be cut or, in flatter areas they would sink small shafts from which adits would be cut, generally along strike. Since geologists are eternal optimists, it is very frequent to encounter such old mine workings in many present day prospecting sites. The assumption is always that whoever was there before did not look well enough, or most likely, the price of the metal concerned was not high enough to make the venture viable at that stage. Obviously, these old workings are always very closely scrutinized since they will add valuable data at practically no additional cost (fig 156).
Figure 156 – Preparing to go down a prospecting shaft (Alentejo, Portugal).
Returning to the rock outcrop sampling, it is most advantageous where the outcrop is good and very continuos, since it is much cheaper than drilling. In the old days the sampling was done by chipping the rock with a chisel and hammer but now there are diamond circular saws that do not need water to cool and make the exercise much simpler and faster, although a bit dusty and hence the masks in figure 157.
Figure 157 – Sampling team at work (Boula, India).
Figure 158 shows the sample groove and respective number.
Figure 158 – Sample groove and respective number (Boula, India).
So, all is well and a drilling programme is planned and budgeted. It is now fundamental to prepare a yard to store the drilling core and also a sample preparation laboratory where the samples can be cut crushed quartered, a portion sent to an assaying laboratory and the remainder kept for potential future use (fig. 159). Naturally this sample laboratory must have all the necessary equipment to prevent contamination. For the more basic prospecting facilities the core is simply split and half is sent away.
Figure 159 – Initial stage of preparation of future core shed, left, and sample preparation lab, right (Boula, India).
Returning to the core yard, for an effective and thorough study of the diamond drill core, especially in new areas, not only must each hole be meticulously geologically logged, but perhaps even more important, the core of as many of the holes available as possible must be laid side by side, to assist in the correlation of all the existing stratigraphic features, in order to develop a local and/or regional succession. Hence, the larger the yard, the easier it is. Figure 160 is the core yard where I was fortunate enough, at a very early period of my career, to be present during the early stages of the drilling programme in the Bush Veld Igneous Complex and assist a senior colleague. His very good stratigraphic experience permitted the identification of all the individual stratigraphic units immediately above and below the Marensky Reef (item 2.3 Magmatic Differentiation), so necessary for a successful final synthesis.
Figure 160 – Very well planned Core shed and yard (Springs, South Africa).
Prospecting is not done only to find new ore resources but, just as important, it is necessary when, for example, in an already working mine, there is the possibility of exploiting an additional metal which was previously considered waste. In that case, the waste dumps of the original extraction, must be reevaluated to ascertain if it contains enough of the second metal to be re-qualified as ore. This is what happened at the chrome mines at Boula in India, where platinum was though to have sufficient grade to be exploited as well (fig. 161).
The little markers seen all over the chromite waste dump, actually form a well delineated sampling grid. It is possible that the sampling method selected, which only used chips cut from every piece of rock within the delineated square might be misleading, but that is how it was done. Also, prospecting within a working mine must continue throughout its life time to maintain a detailed advanced knowledge of the location and grade of the ore ahead of the working faces.
Figure 161 – Chrome mine waste dump sampled for platinum (white tags on little metal rods) (Boula, India).
Finally an important point about the reliability of sampling. Even though the two following figures are actually mine stope sampling for grade control, it is important to make it absolutely clear that sampling must strictly adhere to a specified grid. The yellow lines are actually the markings of each sample. When I left the gold mines the hammer and chisel chipping method was still being used. Careful examination of figure 162 shows very nice looking buckshot pyrite just to the left of the sampling line, which means good gold values, but no buckshot at the actual sampling location. If the sampling position is moved to include the buckshot, we are no longer dealing with a sample but rather with a bias grab specimen.
Figure 162 – Underground single sampling for gold in the Witwatersrand, South Africa.
In figure 163 we are dealing with an ore horizon consisting of various conglomerate bands separated by quartzite, termed internal waste because, as it should be expected, it never carried any gold. In the present case, for a detailed study and considering the abrupt changes in thickness of the conglomerates the sampling zone consists of four adjoining sections.
Figure 163 – Underground detailed sampling for gold in the Witwatersrand Mines, South Africa
Wyatt Yeager – wyattyeager@gmail.com
No comments:
Post a Comment